|Minimum Order Quantity||25 Kg|
|Site Location||Pan India|
|Material Procurement||Customer End|
|Service Charges||Depends on the quantity required.|
|Packaging Size||25 kgs|
|Shelf Life||12 months.|
Jemkon’s range of epoxy concrete repair material have gained wide acceptance in repairing damaged concrete floors, potholes, cracks and floor undulations, which were other wise difficult to be repaired with normal cement concrete.
In factory floors, we normally repair a damaged concrete patch or a pothole by making a concrete mixture, but in cases of smaller patches, these generally fail or they start getting removed. This happens due to the adhesion failure in between the old and new concrete.
Our Concrete repair material, “Tech 12” is a epoxy based 3 component product with resin, hardener and specially formulated fillers. The contents are all pre weighed and supplied in a kit/ set, to avoid proportion errors while mixing. It can be easily used as a DIY- Concrete repair material, by cleaning the pothole or damaged surface, mixing the contents as per ratio and applying by a trowel. The surface can be used for light foot movement after 12 hours of curing and in case of heavy traffic after 24 hours.Uses
|Minimum Order Quantity||500 sft|
|Usage/Application||Industrial/ Commercial/ Residential|
|Packaging Size||5,20 & 200 (Also customised for large quantities)|
|Paint Base Type||Water based & solvent free|
|Paint Type||Epoxy & PU|
|Finish||Gloss & Matt finish|
|Country of Origin||Made in India|
Jemkon offers DIY- floor coatings which are single and two-component, water-based and solvent-based that suits every pocket. Our Coatings come with wide color options and even can we customize the color depending upon our client’s need.
What is the need for DIY- floor coating, when are there hundreds of professional floor coating companies? Yes, we need DIY- floor coatings when it comes to small garages or parking lots at our residences because for smaller areas the cost of labour for a professional company would be high. The single-component or 1k type of coatings can be applied by people with even less knowledge of mixing, as its a single component. For DIY- floor paints, the person needs to have basic knowledge of surface preparation, cleaning and application methods.
All our DIY – floor paints can be applied by brush or rollers which are available almost at every paint shop. Any loose paint or old surface has to be cleaned thoroughly first, the material to be mixed as per the ration mentioned on the container. We recommend to mix less quantity at one time to avoid the mixed material from getting jelled fast. Evenly paint the surface with the required number of coats and leave it for curing for a minimum of 8 hours. The coated floor can be used after 24 hours.Uses
Rated by 3 Users