Jemkon Private Limited
Pune, Maharashtra
GST No. 27AADCJ0607Q1ZC
TrustSEAL Verified
Call 08042966511
74% Response Rate
SEND EMAIL
Product Details:
| Type Of Services Available | Epoxy painting |
| Service Location/City | Pan India |
| Location Preference | All India |
| Type Of Property Covered | Industrial |
| 3D Interior Design Available | No |
Jemkon’ s range of epoxy floorings have been applied more than a million sqft of the area and have been widely accepted in almost all verticals of the industry. Epoxy Floorings are the most commonly used in situ types of material, which are also one of the widely accepted floor coatings all over the world because of its variety of characteristics like adhesion, gloss, durability, etc. Epoxy floorings generally consist of resinous material with a combination of filler, which includes resin, hardener, filler, and colour. These are mixed on-site and applied within a particular time frame. Wide options of colour customization are possible and application can be done from as low as few microns to few millimetres.
Uses
Product Details:
| Service Location Type | Industrial |
| Service Location/City | Pan India |
| Material Type | Concrete |
| Application Area | Industrial |
| Other Flooring Services | Cement Flooring |
A study found that around 80-85% of the epoxy/ PU floorings failure is due to the high level of moisture content in the concrete or due to rising moisture. The percentage of failures due to faulty material and bad workmanship is very low. Jemkon offers chemistry to tackle and eliminate the failure due to moisture content in concrete by temporary moisture barrier epoxy screed.
The moisture content of concrete before the application of any regular epoxy or PU coating needs to be ≤ 4%. The Time taken for concrete to reach the permissible limit of ≤ 4% moisture after the concrete floor is cast is generally around 28 days also depending on the air pressure and other climatic conditions in the environment. And in some cases, it has also been observed that even after 90 days the moisture content is higher due to the high water table present beneath the concrete.
If the epoxy/ PU coatings are applied on concrete surfaces > 4% moisture, then Blistering or bubbles generally occurs due to Osmosis, which is the passage of water from a high water concentration area through a semi-permeable membrane to a low water concentration area.
Jemkon’s epoxy cementitious floors generally consist of resinous material with a combination of filler, which includes resin, hardener, and cement-based specially formulated aggregates, which are mixed onsite with a variable speed stirrer and applied within the time frame. These are applied at a thickness ranging from 2mm to 100mm depending upon the user’s need. As these are temporary barrier screeds, a topcoat is advised to give aesthetics and other functional properties which can be done by regular epoxy or polyurethane coatings.
Uses